Code Corporation CR3500 Manual de usuario descargar pdf (Pagina 18)

C004387_07_CR3500_User_Manual - 12

Save Settings

1.8.4 - RS232 (Serial) Cable Installaon Guide

1. Aach the RS232 (Serial) Cable to the CR3500.

2. Connect the RS232 (Serial) cable to a serial port on the computer (Figure 1.18). There is no need to power o the computer.

3. The RS232 (Serial) interface has an oponal 5V/1.5A power supply (Figure 1.19). If you have a power supply, plug the power supply

adapter into the RS232 (Serial) cable and then plug the power adapter into a wall socket (Figure 1.20).

4. Once properly connected, the CR3500 will power on and beep.

5. For RS232 (Serial) mode scan M418_02 (below). If the power supply is not connected scan M074_02 (below).

6. Scan the Save Sengs Code (M188_02).

RS232 (Serial) RS232 (Serial) Mode

Factory Reset No Power Supply Save Sengs

Warning: Code Corporaon approved power adapter must be used. Reader failure due to use of

incorrect power adapter will void warranes.

Figure 1.19

Figure 1.18

Figure 1.20

RS232 (Serial)

Factory Default Sengs

Mode: RS232 (Serial)

One Way Mode

Baud Rate: 57600

Stop Bits: 2

Data Bits: 8

Parity: None

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 63 64

Sin comentarios

Code Corporation CR3500 Manual de usuario Pagina 18